If you have one PC and you have internet problems then there could be many reasons for it, but incase you have multiple pcs at home and all other pcs have internet access and LAN access and there is this one pc which just wouldnt work, then fixing it could be a little easier.
Firstly, you need to make sure that hardware and connection wise ,everything is fine.Typically it is an ip address issue which can be easily fixed by entering a static ip or sometimes failure to get a DNS server too, which again can be fixed by entering the DNS servers manually, so this solution takes care of both.Most of the time the reason why internet or LAN doesnt work in a pc is due to failure of getting an ip address.So here's how you go about doing it:
NOTE:Presuming that your pc is connected to a router of ip address 192.168.1.1 ..hence giving pc ip as 192.168.1.10 , if it is connected to a router of ip 192.168.0.1 , then set pc ip as 192.168.0.10
Step 1 : Go to Start->Control Panel and switch to Classic view and select Network and Sharing Center
Step 2 : Then on the left hand vertical column select Manage Network Connections
Step 3 : Now if you are connected Wirelessly to your router then right click on Wireless Network Connection otherwise right click on Local Area Connection and click on Properties
Step 4 : Then go to Internet Protocol Version 4 (TCP/IPv4) and click on Properties
Step 5 : Now Select Use the following IP addres and enter the following
IP address : 192.168.1.10
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
Preferred DNS server : 208.67.222.222
Alternate DNS server : 208.67.220.220
Step 6 : Click on OK and close other windows and hopefuly you should have your internet connection working, if you still have problems you can still ask me!!Cheers!!
|
10
comments
]
10 comments
I have a DNA 211-I BSNL modem. I can connect to internet but cannot configure the modem for wifi. When I type 192.168.1.1 I get the message "Connection interrupted". How can I get through this problem. Please help.
are you able to ping 192.168.1.1 in the command prompt?
thanx bro...its working..
cheers
glad it helped!!
I could not ping 192.168.1.1 Whom Should I contact? BSNL Customer care is telling there is problem in my end.
yes , if you cannot ping 192.168.1.1 then something wrong at your end.. do post a screenshot of the output of the command ipconfig from the windows command prompt
hey dude thanks for ur support. I got a ques..that....I got a laptop and a pc and i have lan internet. earlier I used it both on pc and lapy but since few days its working on only lapy.coz some broadband fellow came and did somthing( he said we can only access on on pc/lappy).earlier i spoofed mac to accsess on pc but it doesnt working. pls help me out. thank you
DOes the internet work as soon as you swtich on your modem or do you use a dialer to connect?
I HAVE TO CONNECT TO THE INTERNET FIRST,,,I Hve the same problem...!!and i cnt find the ip addresses of the mwifi modem i have ...!!!help
Thanks man....I googled and got it, and its working for me also... cheers :)
Post a Comment